PAGE 5 of 177
CX0344 Rev 05.3
2.1.1.1 Operating Limits
Category
Parameter
Specification
Inspection
Surface
Maximum coating thickness:
Up-side-down orientation
Bare metal only
Vertical orientation
0.5 mm
(0.020 in)
Horizontal, Right-side-up
orientation
1 mm
(0.040 in)
Condition
Clean, free of excess rust, scale, debris
(i.e. dirt, sand, etc.)
, ice, frost
Minimum thickness
3 mm
(0.120 in)
Minimum ID, internal
circumferential driving
610 mm
(24 in)
Minimum OD, external
Circumferential driving
70 mm
(2.75 in)
Minimum OD, longitudinal
driving
305 mm
(12 in)
Maximum surface temperature
50°C
(122°F)
Category
Parameter
Specification
Scanner
Maximum umbilical length
30 m
(100 ft)
Maximum payload
(performance may vary with
surface condition)
10 kg (23 lb)
(Umbilical and attachments are considered
payload)
Attachments
Restricted to those listed in compatible
components or child products
Orientation while driving at
height >2 m
(6 ft)
on vertical
surface
Umbilical strain relief to point downwards,
or at worst, horizontal. It is not to point
upwards
Required radial clearance
(handles removed, circumferential
driving)
70 mm
(2.75 in)
on outer diameters
<200 mm
(8 in)
81.5 mm
(3.2 in)
on outer diameters
>200 mm
(8 in)
