PAGE 13 of 177
CX0344 Rev 05.3
2.2.10. Preamp Bracket
CES029-
2.2.10.1 Intended Use
The Preamp Bracket is intended to mount objects such as preamps, splitters,
etc. on a rack or dovetail bar that is mounted to the NAVIC crawler. The
mounted object is attached to the NAVIC with a lanyard or probe cables
strong enough to prevent the object from falling, should the straps or screws
that hold it to the bracket fail. Also, if the object is mounted with straps, it is to
have smooth edges so as not to cut the straps.
2.2.10.2 Operating Limits
Category
Parameter
Specification
Preamp Bracket
Maximum weight of
mounted object
1.36 kg
(3 lb)
Scanner
Required radial
clearance
(handles removed,
circumferential driving)
Dependent on
object mounted on
Preamp Bracket
2.2.11. NAVIC Backpack
CXS077
2.2.11.1 Intended Use
The NAVIC Backpack is intended to mount objects such as preamps, splitters,
etc. on the NAVIC crawler. The mounted object is to be attached to the
NAVIC with a lanyard or probe cables strong enough to prevent the object
from falling, should the straps fail. Also, the object is to have smooth edges so
as not to cut the strap.
2.2.11.2 Operating Limits
Category
Parameter
Specification
NAVIC Backpack
Maximum weight of
mounted object
1.36 kg
(3 lb)
Scanner
Required radial
clearance
Dependent on
object mounted to
Backpack
