PAGE 61 of 177
CX0344 Rev 05.3
The etched line
(Fig. 118)
is to be used
to align the front swivel mount to a
horizontal position
(Fig. 119)
.
5.6.2. Umbilical
To mount the umbilical to the crawler’s umbilical mount, follow these steps:
1.
For scanning at heights greater than 2 m
(6 ft)
the umbilical must be set
Fig. 119 - Align swivel mount with etched line
WARNING!
FALLING OBJECT HAZARD
.
For operating at heights greater than 2 m
(6 ft)
,
ensure the umbilical strain relief is aligned according
to the below instructions and never points upwards
as shown in
(Fig. 120)
. The crawler could fall.
SEVERE INJURY
or
DEATH
could result.
Fig. 120 - Align umbilical mount
x
Fig. 121 - Incorrect use
x
Fig. 122 - Incorrect use
