PAGE 65 of 177
CX0344 Rev 05.3
5.7. Left Drive Module
5.7.1. Swivel Mount
Located at the front of the left drive module, the swivel mount is used to connect
scanning accessories such as a raster arm module or probe frame system.
Rotate the two black wing knobs
(Fig. 132)
to loosen the dovetail jaws. Slide the
accessory’s frame bar along the dovetail jaws. Rotate the two black wing knobs to
clamp the frame system/raster arm in place.
The front mount pivots freely
(Fig. 133)
and cannot be locked in a fixed position.
When a frame bar is connected to both dovetail mounts on the two modules, this
free movement allows the scanner to flex while steering.
TIP:
Alternate mounting procedure is possible (see “Swivel Mount” on page 60
for additional details).
Fig. 132 - Frame bar installation
Fig. 133 - Swivel mount angle
