PAGE 79 of 177
CX0344 Rev 05.3
4.
Place the 2 mm hex wrench into the force adjustment screw
(Fig. 180)
.
5.
Lightly press the long arm of the 3 mm hex wrench down. Using the 2 mm
hex wrench, loosen the force adjustment screw but do not remove it
(Fig. 181)
.
6.
Gently apply pressure
on the long leg of the 3
mm hex wrench until the
force adjustment marker
lines up with the desired
spring tension. While
keeping the markers in
line, tighten the force
adjustment screw
(Fig. 182)
.
Fig. 180 - Insert hex tools
Fig. 181 - Press 3 mm hex wrench down
Heavy
Medium
Light
Force Adj. Marker
Heavy
Medium
Light
Force Adj. Marker
Fig. 182 - Choose desired tension
