PAGE 91 of 140
DP0029 Rev 02.2
To place the crawler on the inspection surface, follow these steps:
1.
Ensure crawler preparation is complete
(see "Preparation for Use" on page 31)
and system startup has been performed
(see "System Startup" on page 88)
.
2.
Release the front swivel adjustment levers
(Fig. 206),
located at the front of the
crawler, to position the front swivel mount.
3.
Raise the front swivel mount to ensure they will not hinder the wheels from
contacting the inspection surface
(see "Swivel Mount" on page 44)
.
Fig. 206 - Front swivel adjustment levers
Fig. 207 - Lower crawler’s pry point towards inspection surface
