PAGE 94 of 140
1.
Ensure the manipulation handle is installed on the crawler.
2.
Firmly grasp the crawler handle with one hand, and the manipulation handle with
the other, carefully press down on the manipulation handle to lower the pry point
of the crawler towards the inspection surface
(Fig. 210)
.
3.
When the front two wheels of the crawler separate from the scan surface,
continue to press down on the manipulation handle
(Fig. 211)
.
4.
Pivot the crawler away from the scan surface and lift the crawler using the
manipulation handle and the crawler handle
(Fig. 212)
.
Fig. 210 - Press down on manipulation handle
Fig. 211 - Pivot away from scan surface using pry point
Fig. 212 - Lift from scan surface
