PAGE 13 of 142
DN0108 Rev 00
2.2.10. Preamp Bracket
CES029-
2.2.10.1 Intended Use
The Preamp Bracket is intended to mount objects such as preamps,
splitters, etc. on a rack or dovetail bar that is mounted to the SKOOT
crawler. The mounted object is attached to the SKOOT with a lanyard or
probe cables strong enough to prevent the object from falling, should
the straps or screws that hold it to the bracket fail. Also, if the object is
mounted with straps, it is to have smooth edges so as not to cut the straps.
2.2.10.2 Operating Limits
Category
Parameter
Specification
Preamp Bracket
Maximum weight of
mounted object
1.36 kg
(3 lb)
Scanner
Required radial
clearance
(handles
removed circumferential
driving)
Dependent on object
mounted on Preamp
Bracket
2.2.11. Battery Powered Optical Guide
CXS080
2.2.11.1 Intended Use
The Battery Powered Optical Guide is intended to provide a point of
reference useful for guiding the SKOOT along a given path
(i.e. a weld cap)
.
It is intended to be mounted in the dovetail groove of any probe holder
frame or frame bar.
2.2.11.2 Operating Environment
Category
Parameter
Specification
Scanner
Required radial
clearance
Dependent on
mounted orientation
of Optical Guide
2.2.11.3 Power Requirements
Power requirements: 1 AA battery
2.2.11.4 Environmental Sealing
IP64
