Degree Celsius (°C) or Fahrenheit (°F) unit display is available in this device. While the unit is ON, press and
hold both the “MODE” button and the “MEMORY” button for approximately 3 seconds. This will change the
mode to either °C or °F.
While in power ON mode, press & release “MEMORY" button to see the temperature stored in memory.
Clean the sensor periodically to ensure an accurate
reading. Please use a cotton swab with 70% concentrated
alcohol to clean the lens. Allow the lens to dry for at least
1 minute before the next measurement or use a tissue
paper to dry it.
Please refer to the User's Guide to understand object temperature measurement and silent mode.
The Power will be OFF automatically if not in use for approximately 30 seconds.
°C / °F SWITCH
MEMORY
CLEANING THE LENS
ADDITIONAL FEATURES
POWER
Manufacturer:
Jitron Pte Ltd
8 Ubi Road 2, #05-01
Zervex, Singapore 408538
Tel: (65) 6748 6815
E-mail: enquiry@jitron.com
Web: www.jitron.com
Rev. 02/20
The low battery icon on the screen indicates low battery.
Please open the battery cover by sliding the battery cover out.
Replace with new AAA 1.5V alkaline batteries.
BATTERY REPLACEMENT
BATTERY:
AAA 1.5V ALKALINE
