5. Turn on your camera, flash, and shift the Mode switch on receiver to the Flash option.
Then press the shutter button on your camera, and both indicators on the transmitter
and the receiver will turn green. At this time, your flash will be triggered successfully.
Note!
Since the JF-U does not transmit TTL settings, using a fully manually controlled flash or
light unit is recommended. Please set the desired power output on the flash manually.
Wireless Shutter Release
Note
:
This function requires the use of a JJC shutter release cable (purchased
separately). Check the enclosed Connecting Cable Brochure for the cable you
need.
1. Check to be sure that both the transmitter and the receiver are set to the same
channel.
（
If multiple flash units and receivers are used, please make sure the channel
of all the receivers are the same with the transmitter.
）
2. Turn off both your camera and receiver. Mount the receiver onto the camera hot shoe
socket. Connect the ACC2 socket of receiver and camera remote socket by the
shutter release cable.
