DE
Delay/Self
Timer
Just like the self timer on your camera, the TM
remote allows you to set any delay (in 1
second increments) up to 99 hours, 99
minutes and 99 seconds.
0s to 99hrs 59min 59s
BU
BULB/Long
Exposure
It allows you to take exposures up to 99 hours,
99 minutes and 99 seconds in length.
0s to 99hrs 59min 59s
INT
Interval Timer
The Interval Timer can be set to any time
period up to 99 hours, 99 minutes and 99
seconds as well. For example, If you set it to
10 minutes, one exposure will be taken every
10 minutes until either the film runs out or the
Exposure Count limit has been reached.
1s to 99hrs 59min 59s
N
Number of
Exposures
This setting permits you to set the number of
exposures that will be taken, up to 399 shots.
1 shot to 399 shots or
unlimited
Speaker
Speaker ON/OFF
ON/OFF
l
LED light/ Lock button
Press the button momentarily to turn on or turn off the backlight.
Press and hold the button for about 2 seconds to lock or release the following buttons:
start/stop button, arrow button and set button
l
START/STOP Button
Press this button to start or stop the timer.
l
Arrow Button and SET Button
Use arrow button to set the timer. Press
◄
or
►
to select an item,
▲
or
▼
to adjust an
item. The current selection is indicated by the selection cursor.
Press the SET button to begin editing or save the current setting. To view other settings,
press the left or right arrow button. And the selection cursor will move and indicate the
current setting.
The following are setting steps:
1. (DE) Delay/Self Timer (Time until shooting starts)
Hours
Minutes
Seconds
2. (BU) BULB/Long Exposure (Exposure Time)
