and the release indicator lamp flashes at ONE-SECOND intervals. Meanwhile,
“
TIMER
ACTIVE
”
and
“
RELEASE
”
icons also flash in the LCD screen.
Between shots, the LCD screen shows the time remaining and
“
TIMER ACTIVE
”
icon
flashes once every second until the next photo is taken. If the speaker is ON, a beep will
sound three times at ONE-SECOND intervals before the shutter releases.
The following chart shows status of the LCD screen after the timer starts:
1.Flashes when timer is active
2.
When shutter is open
: Time remaining
until shutter closes.
Between shots
: Time
remaining until next shot.
3. Number of shots remaining
4. Flashes when shutter is open
The diagram below shows the progress of timer:
Delay(
DE
), Exposure/BULB(
BU
) and Interval Settings (
INT
)
IMPORTANT:
Please ensure the Interval time is at least 2 seconds longer than Exposure time.
The diagram below shows how the speaker and the release indicator lamp work before
shutter releases.
The following diagram is a timetable of beep sounding (
) and release indicator flashing(
)
with a
delay of 5s, and exposure time of 4s, and an interval of 9s.