● Please do not calibrate the compass in strong magnetic area, such as magnetic field,
parking place or construction areas with underground reinforcement.
● Please do not carry magnetic materials with you (such as keys, cell phones, etc) when
calibrating compass.
● Please keep away from big metal when calibrating compass.
!
!
Attention: To fly at GPS mode, please choose an open and wide space for the flight, and
make sure that the satellite amount is over 7.
Drone Compass Calibration
1. Compass calibration should be performed after successful drone initial detection.
2. Drone compass calibration should be done for every flight. That is to say, if changing new battery
or the battery is reinstalled, compass calibration should be done again.
Step 1: Horizontal Calibration
Step 2: Vertical Calibration
Hold the drone with camera facing up, and rotate it 360 degrees along the central axis for
about 3 circles until the front and rear lights of the drone change from flashing to solid on,
the compass calibration is successful.
After successful drone initial detection, the drone front and rear lights flash light green
alternatively. Hold the drone horizontally and rotate it 360 degrees along the central axis for
about 3 circles. The drone front and rear light will change from flashing light green alternatively
to flashing green alternatively when horizontal calibration is completed.
Attention:
Two Steps of Compass Calibration:
-11-
