!
●The battery plug should be connected correctly with face up (but not upside down) when
plugging into the balance charger; failure to do so will result in charging failure or
charger damaged.
●We recommend using 5V (1-2A) adaptor for charging.
●
It is not suggested to charge by computer.
Warm tips
：
Step 1. Make sure that your power adaptor (5V 1-2A) is connected with the power outlet (indicated
as Pic.1);
Step 2. Connect the balance charger to the power adaptor by plugging in the USB cable accordingly
(indicated as Pic.2);
Step 3. Insert the white triplex-wire plug of the battery face up into the triplex-wire socket of the balance
charger (indicated as Pic.3).
Full charging takes about 5 hours.
●When charging is proceeding, the green light keeps flashing slowly and the red light keeps solid on.
●When charging is finished, both of the green light and the red light keep solid on.
●If the battery and charging converter is not connected with the balance charger, but the balance
charger is connected with the adaptor, the red light keeps solid on and the green light is off.
●Once there is any malfunction, the red light will be solid on and the green light will keep flashing
rapidly.
Turn counter-clockwise 90 degrees of the lock located at the bottom to the “UNLOCK” position; then
put your thumb and index finger on the designated position and pull backward with appropriate force,
the battery will be removed. To avoid slipping, please keep your finger and your drone dry and clean.
How to Remove the Battery
How to Charge the Battery of Drone
USB
Pic.1
Pic.2
Pic.3
Power adaptor
(
not included
)
Balance charger
USB cable
Battery
-4-
