Left hand throttle and right hand throttle are available for option at the remote controller. User can
choose different joystick mode as per operation habit. There are 2 joystick modes that could be found
as below:
Joystick Mode
!
Attention: To change the joystick mode of the remote controller, please make sure that the
remote controller is under signal connection status (the indicator light keep
flashing). If not, the stick mode could not be changed.
Step 1. Keep pressing the red button and turn on the remote controller, the remote controller is under
signal connection status (indicated as pic.1);
Step 2. Keep pressing the RTH button “ ” for 3 seconds to choose the throttle control mode (indicated
as pic.2). The throttle control mode will change according to each press. The mode number is
shown on the LCD screen. The throttle control mode is set at mode 2 by default.
Remote Controller Joystick Calibration
How to Switch to Joystick Mode:
Step 1. Keep pressing the red button “
” and turn on the remote controller (indicated as pic.1);
Step 2. Press the calibration button “
” for 3 second, the remote controller will send out 3 beep
sounds and the indicator light of the remote controller turns from flashing quickly to slowly.
Rotate the left and right joysticks to the greatest extent to any direction for 2 circles (indicated
as pic.2);
Mode 2
Mode 1
OFF ON
Model
OFF ON
Model
Throttle
Leftward/Rightward
Forward
Turn Left/Right
Throttle
Leftward/Rightward
Forward
Backward
Backward
Turn Left/Right
Pic.1
Pic.2
OFF ON
A B
A B
Model
OFF ON
Model
-8-
