4
C-fly
(2). Connect APP
Open your mobile phone, navigate to settings and then the WLAN:
When flying with the APP, click the network of "Drone-xxxxxx (serial
number)" to connect the drone to the APP. In this situation, the drone
has a relatively shorter range.
When flying with the controller, click the network of "Controller-xxxxxx
(serial number)" to connect the drone to the remote controller. In this
situation, the drone has a relatively longer range.
Open the APP to enter the interface as shown in the left picture. Click "Start Flying" to enter the operation interface as
below.
Note: The mobile phone need to support 5G Hz WiFi.
Using APP in flight can monitor the picture and the current situation of the aircraft in real time.
When aircraft controlled by RC while connect APP, the priority control is RC. Some functions on the APP
can not be used (photo, camera, follow me, waypoint function will not be affected),aircraft can control
by APP without RC, for specific operation, please refer to the part of "use APP to control flight ".
5). Operate the aircraft
(1). Take off
○
Method 1: take off manually
When aircraft is on standby mode, please initiate aircraft
as below:
Dial left and right joystick outward as pictures show
at same time,and keep up more than 3 seconds,the
propeller begins to rotate.
Slowly upward throttle joystick,aircraft will take off.
○
Method 2: one key takeoff
Long press "Take off / Land" button 2-3 seconds,
There is "B-B-B" sound, meanwhile, the aircraft will
automatically take off to about 1.2m and hover.
(2). Land
Before landing, pay attention to the landing site, stay away from the crowd and obstacles, choose a relatively flat ground as
the landing site.
○
Method 1: land manually
Slowly downward throttle joystick,aircraft will slowly land, when aircraft hit the ground, keep downward the throttle joystick
until the propeller stops.
