Remote controller status indicator
Drone status indicator
No.
1
Drone 2.4GHz disconnected.
2
Drone is in initialization detection status.
3
No GPS signal, drone is in gesture mode.
4
Front light glows solid red, rear
light glows solid green.
Good GPS signal, drone is preparing
for GPS mode.
5
Drone is in gyroscope calibration status.
6
Drone is in compass horizontal calibration.
7
Front and rear lights flash green alternatively.
Drone is in compass vertical calibration.
8
Front light glows solid red, rear light
flashes red slowly.
Drone is nearly low voltage, 1/4
battery level left.
9
Front light glows solid red, rear light
flashes red rapidly.
Drone is in low voltage, only 1/6
voltage left.
10
Front and rear lights flash once, stop
for 1.5 second.
Something wrong with the gyroscope.
11
Front and rear lights flash twice, stop
for 1.5 second.
Something wrong with the barometer.
12
Front and rear lights flash three times, stop
for 1.5 second.
Something wrong with the compass.
13
Front and rear lights flash fourth times, stop
for 1.5 second.
Something wrong with the GPS module.
Indicator status
Meanings
Front and rear lights flash yellow rapidly.
Front and rear lights flash red, green and
yellow alternatively.
Front lights glow solid red, rear lights glow
solid green.
Front and rear lights flash green rapidly.
Front and rear lights flash yellow alternatively.
No.
1
2
3
4
5
Remote controller status
Indicator lights flash quickly.
Signal strength on LCD display is less than
two grids or no displaying
;
and the remote
controller makes steady beep...beep...beep
sound.
The remote controller is under signal connection
status.
The remote controller is in low voltage status.
Please change a full charged battery.
1.The distance between drone and remote
controller is so long that the signal is weak.
2.The battery is removed after the drone
connects to the remote controller.
Description
Indicator lights flash slowly with steady beep..
beep sound and the battery legend “ ” on
LCD display flashing.
Battery legend “ ” on LCD display is as
shown, with steady beep..beep...beep sound.
Battery is running out “ ” ; the drone will return
when the altitude is over 100m or the distance is
over 300m.
Battery legend “ ” on LCD display is as
shown, with steady long beep sound.
Battery is low “ ” ; the drone will return when
the altitude is over 15m or the distance is over
15m; if either the flying altitude or flying distance
is less than 15m, the drone will land to the spot.
-12-
