金 科 达 诚 安 检 设 备 有 限 公 司
J K D C S E C U R I T Y C O L I M I T E D
Add: Jinkedacheng Science Park,N0.59 Xinhe Road,Shangmugu,Pinghu Town,
Longgang District,Shenzhen City,GuangDong Province,China
Web: http://www.securityjkdc.com
Tel: +86 755-28408621
2
1.Product introduction
Swing barrier is generally used in simple dissuasion level access control of public
passages. It is widely used in work attendance checking systems of factories,
consumption systems of public institutions, access control of residential estates,
ticket exit systems of scenic, sports and other arenas, hand-key management
systems of construction sites and so on. The mechanical part of the barrier
contains an emergency
control device, which allows free passage in case of power fail. The turnstile has
different optional configurations for the applications of all building conditions
and for the control of all kinds of passage entrance-exits. Different
identification systems (ID card, IC card, bar-code, hand-key, fingerprint, iris, etc.)
can be configured into the barrier system. The barrier can be connected to any
kinds of controllers and various consumption devices.
2. Features and Functions:
1. SUS304# stainless steel rainproof case
2. LINIX (the best micro-motor brand in China) brush-less DC motor is used and
its surface is plated with dichromate;
3. Length of rotating arm: 500mm-900mm
4. Fault detection and alarm functions, easy to use and maintenance.
5. The running status can be programmed and controlled with the built-in
keyboard on the main board.
6. Mechanical anti-pinch function. If the gate meets resistance in the reset
process, motors will stop working automatically within the prescribed time and
reset again after the default delay (till fully reset).
7. Anti-breakthrough function. The gate is locked automatically until opening
signal received.
8. Synchronization functions(for dual gate equipment).
9. Automatic reset function. Should the user fail to pass within the prescribed
time (default time is 5 seconds), the system will cancel the authority of the
current user automatically.
10. Gate can be set as normally open or normally closed.
11. Can be used with variety of card readers: IC / ID card readers, bar codes,
fingerprints, etc. (Access controller needed)
12. Direction can be set as single-direction or bi-direction.
13. The device can be connected to management computer to realize remote
control and management.
