JKEXER AeroWork 897, Owner'S Manual

6th. Press        to confirm all 12 ranges are set. Default setting time 30 flashes.

7th. Press SPEED or INCLINE      /      or digital button 0 ~ 9 to set desired workout time.

8th. Press        to confirm then press       to start running. 

U1 & U2 are for setting two running profiles that you prefer. After finishing setting of 

two User programs, you may follow below to operate:

1st. Press SPEED or INCLINE      /      button to choose U1 or U2.

2nd. Press        , default setting 30:00 flashes, press INCLINE or SPEED       /      to set desired 
workout time from 10 ~ 99 minutes. 

3rd. Press       and       button to run the profile.

For Target Program (Time, Distance, Calories)

Press        to choose one of three for countdown exercise.

Target Time Program

1st. Press         to choose target time. Default setting time 30:00 flashes, press INCLINE  or 
SPEED      /       to set desired workout time from 10 ~ 99 minutes. 

2nd. Press       and       to start running.

Target Distance Program

1st. Press        to choose target distance. Default setting 1.0 flashes, press INCLINE  or SPEED     

/      to set desired workout distance from 1 ~ 20 km. 

2nd. Press       and       to start running.

Target Calories Program

1st. Press       to choose target calories. Default setting 10.0 flashes, press INCLINE  or SPEED             

/       to set desired workout calories from 10 ~ 990 KCAL. 

2nd. Press        and       to start running.

When the set data counts down to 0, machine will stop automatically.

MASTER POWER SWITCH LOCATION

To complete shut off power to the treadmill, turn off master power switch 

and unplug from outlet .

11