JKEXER Surge 7009, Owner'S Manual

STEP 1.

STEP 2.

REAR
STABILIZER (3)

MAIN FRAME (1)

MAIN FRAME (1)

FRONT STABILIZER (2)

3

Place the Rear Stabilizer (3) under the rear 
side of the Main Frame (1). Using 2 Bolts and 
2 Washers (A) to fix together as illustrated.

Place the Front Stabilizer (2) under the front 
side of the Main Frame (1). Using 2 Bolts and 
2 Washers (A) to fix together as illustrated.

Assembly Instruction 

BOLT & 
WASHER (A)

BOLT & 
WASHER (A)

STEP 3. 

First, get the Cover (8) goes through Handle Bar Post (4) then connect cables provided from 
Handle Bar Post (4) and Main Frame (1). Then have both the stem of the Main Frame (1) and 
the Handle Bar Post (4) to be fixed together by means of the Bolts & Washers (B) provided as 
illustrated. Then Pull down the cover and connect it with Main Frame (1) Cover (8).

MAIN 
FRAME (1)

SENSOR 
CABLE

TENSION 
CABLE

MAIN 
FRAME (1)

COVER (8)

HANDLE BAR 
POST (4)

BOLTS&
WASHER (B)

FRAME(1)

CABLE

SPACER

A

B

KNOB

FRONT POST(2)

MAIN FRAME(1)

1. Turn the tension knob fixed on the Front  Post (2) to level 8.
2. Slide the head of top cable from Front Post (2) into the opening
    end of the hook of another bottom cable from Main Frame (1) as 

    shown on photo A.
3. Pull and stretch the top cable up and slide the spacer into the 
    top opening then place it at the top of U-shapeed brace as shown 

    on photo B. 

Tension Cable assembly