Assembly Instruction
4
HANDLE BAR (5)
STEP 6.
Insert the Seat Post (7) into the MAIN
Frame(1) and adjust the height in
proportion to your desired level, then
tighten the Knob.
SEAT POST (7)
MAIN
FRAME (1)
KNOB
STEP 7.
Loose and remove the Knob, wide open
the bracket, place the Handle Bar (5), tighten
with Knob.
STEP 8.
Firstly connect two cables provided from the
Computer (9) and Handle Bar Post (4).
STEP 9.
Use the bolts provided from Computer (9) to
fix it at the top of
as
Handle Bar Post (4)
photo shown. Then plug Hand Pulse sensor
cable provided from
to
Handle Bar Post (4)
the back of Computer (4).
COMPUTER (9)
HANDLE
BAR POST (4)
COMPUTER (9)
HANDLE BAR
POST (4)
SEAT TRACK (6)
SEAT (10)
STEP 4.
Detach 3 Nuts on the Seat (10) and have
them attach onto the Seat Track (6) and
secure by 3 Nuts as illustrated.
STEP 5.
Place Seat Track (6) onto the upper side of
Seat Post (7) fixed by Knob (12) and Washer.
SEAT POST (7)
KNOB (12)
SEAT TRACK (6)
Summary of Contents for Surge 7009
Page 1: ...MAGNETIC BIKE Surge 7009...
Page 10: ...Exploded Drawing D 21A 21B 21 27A 30 38B 17A 17 20 47 18 20A 19 48 8...
Page 12: ......
