JKEXER Surge 7009, Owner'S Manual

Computer Instruction 

FUNCTIONS

Scan

Automatically scan through each mode in sequence every 6 Seconds. The display loop 
is scan-speed-rpm(if have)-time-distance-Calorie-pulse-scan on the main screen.       

Speed

Displays current training speed, the maximum is 99.9km/ml.       

Rpm

Displays current rotation per minute. Rpm and speed will switch to Another display in 
every 6 seconds after exercise starts.       

Time

Accumulates workout time from 0:00 up to 99:59. The user may Preset target time by 
pressing up and down button. Each increase Ment is 1 minute.       

Distance

Accumulates total distance from 0.00 up to 99.99 km or mile. The user May preset target 
distance data by pressing up and down button. Each increase ment is 0.5 km or mile.    

Calories 

Accumulates calories consupmtion during training from 0 to the Maximum 9999 cal. 
(this data is a rough guide for comparison of Different exercise sessions which can not 

be used in medical Treatment.)    

Pulse

The monitor will display the user's heart rate while exericing.     

Gripped sensor pulse function description:

You will see your current  heart rate (bpm) display on the lcd During exercising. When 

 you start to exercise, you have to hold on Grips with both hands,after 30 seconds to  to 
max. 1 minute, the Pulse figure will display on the lcd. If you hold on the grip with  one 
Hand only, the pulse figure display will become unstable. For the Pulse readout 

 accuracy reason, we'll suggest you to hold on both Hands during exercising. You  may 
also preset target pulse to assist Training. As soon as your current heart rate is  exceed 

the target Figure, the monitor starts to alarm to remind the user.    

Recovery 

After exercising for a period of time, keep holding on grips and Press "recovery" button, 

 the monitor will stop all the function Display except "time" which will keep counting from 
 00:60 - 00:59 - 00:58 - . Down to 00:00. As soon as 00:00 is achieved,the bottom area 
will show  Your heart rate status with grade f1,f2, to f6. F1 is the best, and f6 Is the worst. 

The user may  keep exercising to improve the heart rate Status (recovery result) day by 
day from f6 up to  f1.** press the "recovery" button again to return to the main display.    

Body fat 

In stop mode ,press the body fat button to start body fat Measurement.      During 
measuring, user have to hold both hands on Handgrip. And the lcd display"- - - -"  for 8 

seconds until monitor Finish meauring.  Lcd will display body fat percentage,bmi for 30 
Seconds  ** press the "body fat" button again to return to the main Display.    

Note     

1. When user stop pedaling for 4 minutes,computer will enter into Power save mode, all 
    setting and exercise data will stored until User start exercise again.     
2. If improper display on moniter, please re-install batteries to have A good result.     

3. Battery spec: 1.5v um-3 or aa(2pcs).     

7