8
Step 6.
Plug in the power cable for operation .
POSITIONED FOR OPERATION
There are balancers at the front bottom . Adjust these balancers to make sure main frame is stably
positioned on the ground for exercise .
Step 5
FRONT POST
BOLT & WASHER (C)
SCREW (D)
Use Bolt + Washer (C) to tighten the
Computer (3) on the Front Post (2) from
under side, and use Screw (D) to tighten
it from upper side.
Then tight all the bolts ( A + B + C ).
Summary of Contents for Turbo 772
Page 1: ...MOTORIZED TREADMILL Turbo 772...
Page 24: ...2016 01 07...