JKEXER Turbo 772, Owner'S Manual

COMPUTER INFORMATION

1. Distance: 0 ~ 99.9km

2.  Incline:  0 ~ 12%

    Level: L1~ L3

3. Calories: 0 ~ 999KCAL

4. Time: 0 ~ 99.59 (Default setting 32:00)

5. Pulse: 40 ~ 200 BPM

6. Speed: 0.8 ~ 16kph

7. Dot Matrix: 8 x 16 for speed & incline 

    In quick start and target modes, accumulated laps show at the center, and circle 

    of lap shows around Dot Matrix. 40 dots mean 400 meters in one lap.

    In program mode, it shows speed profile of the program you choose for exercise. 

FUNCTION OF BUTTONS:

1. Quick Speed buttons

    There are 8 speed buttons 2, 4, 6, 8, 10, 12, 14, 16(KPH)

2. SPEED (Fast/Slow) button

    They are for speed adjustment, setting adjustment and for 12 preset program selection.

3. INCLINE (Up/Down) button

    They are for incline adjustment, setting adjustment and for 12 preset program selection.

4. START/STOP button

    A. In stop mode, press to start running

    B. In running mode, press this button for pause mode. PAUS shows on time window, and 

         incline goes down to 0 automatically.

    C. If the machine is not started again in 20 minutes, system will be reset to stop mode.

    D. In pause mode, continuously press for 3 seconds, system will reset to stop mode.

5. MODE button

    1. It's to confirm the setting figures.

    2. To switch function display of 3 LCD

6. EMERGENCY KEY

    A. Insert on the computer for starting the machine

    B. Remove for emergency stop for safety.

    C. When removing, machine stops, and incline does not descend to 0.

11