Sheet SKU#011118 Revision 5/21/01
SB-GM-BURB/10W3 - JL AUDIO, Inc 2001 • Page 4
The top of the factory center console is used as the top of the Stealthbox.
STEP 16:
Remove the lid of the console by removing the 4 torx
screws holding the lid to the console. The hinges should not be
removed from the lid.
STEP 17:
Remove the 8 torx screws that hold the two sections
of the console together. Separate the console.
The lower section of the console will not be used. Save this
piece in the event the original console is ever reinstalled.
STEP 18:
Using four of the supplied pan head screws,attach the
four supplied "L" brackets to the top section of the console using
the factory screw holes, as shown.
STEP 19:
Using the
two supplied plastic
spacers and the four
screws previously
removed in STEP 17,
attach the lid to the top
section of the console.
The spacers should be
inserted between the
lid hinge and the top of
the console.
The console top is now ready for installation onto the
Stealthbox.
