Press and hold button for 10 seconds.
Release.
Light will blink red and blue
to indicate pairing mode.
Select “JLab Epic” in your
device settings to connect.
Light will slow blink blue
when Bluetooth is paired.
Turn Bluetooth off and then
back on in device settings.
In device settings,
forget the JLab Epic.
Turn Bluetooth off then
back on in device settings.
Repeat
FIRST TIME SETUP:
BLUETOOTH PAIRING
directions.
If you still do not see JLab Epic,
repeat
FIRST TIME SETUP: BLUETOOTH PAIRING
directions.
Bluetooth
Settings
CONNECTION TROUBLESHOOTING
I DO NOT SEE JLAB EPIC IN MY DEVICE
Bluetooth
Settings
1
2
Bluetooth
Settings
1
JLAB EPIC DOES NOT RECONNECT TO MY DEVICE AFTER POWERING ON
Bluetooth
JLab Epic
Settings
i
Bluetooth
Settings
2
3
Note: The JLab Epic Executive can remember up to 8 devices. It will try to auto-connect to last device used.
BLUETOOTH IS CONNECTING TO AN UNWANTED DEVICE
2
JLab Gravity
Bluetooth
Settings
JLab Epic
Bluetooth
Settings
JLab Epic
1
If you have more than one device that was connected
to JLab Epic Executive, turn OFF Bluetooth on unwanted
devices and turn ON Bluetooth on chosen device.
