Installation Detail
Scanner Installation (cont.)
11. Pull the retractor cable through the eyes on the cable ties. (Figure 12)
Figure 12
12. Place the supplied ring on the bottom of the laser scanner. Secure the
Thermotrax
cable to the
ring on the scanner. (Figure 13)
Figure 13
13. Secure the remaining cable tie (permanently fastened to
Thermotrax
) around the portion of the
scanner cable that goes to the terminal. This will prevent strain on the end of the scanner cable that
connects to the terminal during use.
Figure 14
JLC 520S v.215.1
!
6
