SECTION 4 - BASE COMPONENTS
4-2
– JLG Lift –
3121222
4.2
BASE FRAME COVERS
Base Top Cover - Installation
NEVER WORK UNDER AN ELEVATED PLATFORM UNTIL THE PLATFORM
HAS BEEN SAFELY RESTRAINED FROM ANY MOVEMENT BY BLOCKING
OR OVERHEAD SLING.
Step Plate/Battery Charger Cover - Installation
Battery Tray/Side Door - Installation
Base Top Cover Installation
1.
Base Top Cover
2.
(4) Attach Screws/Washers
Step Plate/Battery Charger Cover Installation
1.
Step Plate Cover
2.
Attach Screws/Washers/Nuts
Battery Tray/Side Door - Installation
(Same for both sides)
1.
Battery Tray/Door
3.
Cutout in Base Frame
4.
Washer(s)
5.
Base Frame Hinge
6.
Door Latch Pin
NOTE:
Before assembly lubricate (coat) the door hinge
pins with Loctite Moly Paste Lubricant (JLG Part
No. - 3020039).
Lift door (1) into cutout in base frame (2), align
the upper and lower hinge pins on the door with
the holes in the upper and lower base frame
hinge (4) and lower door until set.
If door needs any adjustment up or down to
align with the latch pin slot (5), remove the door
and add or remove washers (3) at the upper
hinge pin.
Summary of Contents for 1230ES
