SECTION 2 - SERVICE PROCEDURES
31215808
2-9
Transformer Replacement
1. Disconnect the wiring connecting the transformer to
other components within the charger assembly.
2. Remove the four nuts from the cap screws securing the
transformer brackets to the base of the charger chassis.
3. Remove transformer.
Printed Circuit Board Replacement
1. Disconnect the wide wiring connector from the end of
the circuit board.
2. Remove the four (4) screw attaching the card to the front
face of the charger chassis.
3. Remove the circuit board.
DC Circuit Breaker Replacement
1. Remove the wiring from the breaker terminals.
2. Remove the bolt, nut and washer from each side of the
breaker, remove the breaker from the housing.
Go
to
Discount-Equipment.com
to
order
your
parts
