SECTION 2 - GENERAL
2-8
3121788
Scissor Arm - Safety Prop
)
NEVER WORK UNDER AN ELEVATED PLATFORM UNTIL IT HAS BEEN
RESTRAINED FROM MOVEMENT WITH THE SAFETY PROP, BLOCKING
OR OVERHEAD SLING.
CAUTION
SAFETY PROP MUST BE USED WHENEVER MAINTENANCE PERFORMED
ON THE MACHINE REQUIRES THE SCISSOR ARMS TO BE RAISED AND
ONLY WITH NO LOAD IN THE PLATFORM.
The safety prop is located in between scissor arms.
To engage the safety prop:
1.
From the Ground Control Station, raise the plat-
form approximately 9 ft (2.7 m).
2.
At the rear of the machine, pull red safety prop
into the vertical position.
3.
Lower the platform until the crossbar above the
prop comes into contact with the prop.
1
4
5
3
2
1
MAF12790
Figure 2-2. Machine Component Locations - 2632R
1. Scissor Arm
2. Hydraulic Tank
3. Pump Assembly
4. Batteries Location
5. Safety Prop
Go to
Discount-Equipment.com
to
order your
parts
