SECTION 3 - CHASSIS & SCISSOR ARMS
3-44
3121788
1001239675-B
MAF12690B
CREATE LOOP OF
EXCESS
CABLE AND SECURE TO
PLATE CUTOUT
SECURE PLATFORM CABLE
TO TUBE SUPPORT ON
CYLINDER. DO NOT TIE TO
LIFT CYL ABOVE 350MM
FROM BLOCK FACE.
ROUTE CABLE
AROUND
CROSS TUBE OF ARM
STACK. DO NOT LEAVE
EXCESS SLACK OR
LOOP IN THIS AREA.
SECURE PLATFORM CABLE
WITH TIE STARP THROUGH CHA-
SIS CUTOUT
ROUTE ALONG OUT-
SIDE OF CABLE GUIDE
ROUTE ALONG OUT-
SIDE OF CABLE GUIDE
SECURE PLATFORM CABLE
TO ARMS AT EACH WELD
NUT ALONG THE ROUTING
PATH ON THE INBOARD
WELDMENTS.
Figure 3-38. Scissor Arm Assembly (2632R) - Cable Routing
Go to
Discount-Equipment.com
to
order your
parts
