SECTION 3 - CHASSIS & SCISSOR ARMS
3121788
3-47
1001239678-B
MAF12590B
SECURE LOOP IN CUOUT
IN PLATE IF NECESSARY.
ROUTE ALONG OUTSIDE
OF CABLE GUIDE
ROUTE ALONG OUTSIDE
OF CABLE GUIDE
SECURE PLATFORM CABLE
TO TUBE SUPPORT ON
CYLINDER. DO NOT TIE TO
LIFT CYL ABOVE 350MM
FROM BLOCK FACE.
ROUTE CABLE AROUND
CROSS TUBE OF ARM
STACK. DO NOT LEAVE
EXCESS SLACK OR
LOOP IN THIS AREA.
SECURE PLATFORM CABLE WITH TIE
STARP THROUGH CHASIS CUTOUT
SECURE PLATFORM CABLE
TO ARMS AT EACH WELD
NUT ALONG THE ROUTING
PATH ON THE INBOARD
WELDMENTS.
Figure 3-41. Scissor Arm Assembly (2632R) - Cable Routing (Coiled) (With Foot Switch)
Go to
Discount-Equipment.com
to
order your
parts
