SECTION 5 - JLG CONTROL SYSTEM
31215079
5-1
SECTION 5. JLG CONTROL SYSTEM
5.1
ANALYZER
Connecting the Analyzer
1. Connect the four pin end of the cable supplied with
the Analyzer to the four position connector J6 on the
PCB in the ground control station (
1
); or, connect at
the platform control station connector X32 (
2
). Con-
nect the remaining end of the cable to the analyzer.
NOTE:
The cable has a four pin connector at each end. It
cannot be connected backwards.
2. Power up the control system by turning the lower
key to the platform position and pulling out both
emergency stop buttons.
men u:
PRESS ENTER
HELP:
Analyzer Display
Escape Key
To return home or access
previous menu
Enter Key
Stores and selects Top Level, Sub
Level, and item menus
Left & Right Arrow Keys
Used to move between Top Level,
Sub Level, and item menus
Up & Down Arrow Keys
Value Selector
1. Ground Control Box Connector
2. Platform Control Box Connector
."%
Go to
Discount-Equipment.com
to
order your
parts
