SECTION 6 - LSS SETUP/CALIBRATION/SERVICE
31215079
6-5
6.7
SERVICE
Description
The system consists of the LSS Module, four Shear Pin Load Cells (sensors), Wire Harness, and various brackets and fas-
teners. The LSS Module is mounted beneath the platform on a bracket. The Shear Pin Load Cells mount between the
platform and the arm structure in such a way that all support force for the platform is applied through them (for mea-
surement). The four Shear Pin Load Cells plug directly into the LSS Module. The Wire Harness connects the LSS Module
to the Host Control System.
MAF04280
1
2
3
4
5
6
1. Slide Block/Load Cell (Left Front)
2. Slide Block/Load Cell (Right Front)
3. Slide Block/Load Cell (Left Rear)
4. Slide Block/Load Cell (Right Rear)
5. Platform Interface Module
6. LSS System Module
Figure 6-1. Load Sensing System Components
Go
to
Discount-Equipment.com
to
order
your
parts
