SECTION 1 - SPECIFICATIONS
1-6
31215079
1.7
ELEVATION/TILT LIMIT SETTINGS
The machine is equipped with the following limit
switches (refer to Table 1-9):
•
Elevation Switch/Rotary Position Sensor
- High
drive speed is cut out when platform is raised above
6 to 9 ft (2 to 3 m)
.
•
Tilt Indicator Warning Light and Alarm
- A red
warning light on the control panel illuminates and an
audible alarm sounds when the chassis is at or
beyond the tilt cutout settings.
IF THE TILT INDICATOR WARNING LIGHT/ALARM IS ACTIVATED WHEN
PLATFORM IS RAISED, LOWER PLATFORM AND DRIVE TO A SMOOTH,
FIRM, LEVEL SURFACE.
Table 1-9. Tilt Cutout Settings
Model
Market
Front to Rear
Side to Side
Lift Up and Drive prevented
when Elevated and Tilted
(Front to Back) beyond the fol-
lowing heights.
Lift Up and Drive prevented
when elevated and tilted
(Side to Side) beyond the
following heights.
330LRT
ANSI
ANSI Exp.
CE
AUS
± 5°
± 3°
33 ft (10 m)
33 ft (10 m)
CSA
± 3°
± 3°
33 ft (10 m)
33 ft (10 m)
430LRT
ANSI
ANSI Exp.
CE
AUS
± 5°
± 3°
43 ft (13 m)
43 ft (13 m)
CSA
± 3°
± 3°
43 ft (13 m)
43 ft (13 m)
Go
to
Discount-Equipment.com
to
order
your
parts
