SECTION 2 - GENERAL
2-8
31215079
TO AVOID PERSONAL INJURY, USE SAFETY PROP FOR ALL MAINTE-
NANCE REQUIRING PLATFORM TO BE ELEVATED.
General Maintenance Tips
NOTE:
Be sure to lubricate like items on each side of
machine.
NOTE:
Recommended lubricating intervals are based on
machine operations under normal conditions. For
machines used in multi-shift operations and/or
exposed to hostile environments or conditions, lubri-
cation frequencies must be increased accordingly.
Operate hydraulic functions through one complete
cycle before checking hydraulic oil level in tank. Oil
should be visible in ADD sight window on hydraulic
tank. If oil is not visible, add oil until oil is visible in
both ADD and FULL sight windows on tank. Do not
overfill tank.
Any time the pump coupling is removed, coat splines
of coupling with Texaco Code 1912 grease prior to
assembly.
1
1.
Safety Prop Actuator Rod
2.
Notch Flats on Rod
3.
Rod Keeper Plate
Figure 2-2. Safety Prop Actuator Rod
2
11
MAF06310
Figure 2-3. Service Maintenance Components
1.
Fuel Tank - (Gasoline or Diesel)
2.
Fuel Tank w/Shut-Off Valve - (LP Only)
3.
Hydraulic Oil Tank
4.
Drive Hubs
5.
Scissor Arm - Sliding Wear Pads
6.
Oil Change w/Filter - Kubota
7.
Fuel/Water Separator Filter - Kubota- Diesel
8.
Hydraulic Charge Filter - Kubota - Diesel
9.
Fuel Filter/Fuel Pump - Kubota- Gasoline
10.
Air Filter
11.
Engine Coolant
Go
to
Discount-Equipment.com
to
order
your
parts
