SECTION 1 - SPECIFICATIONS
1-2
31215079
Drive Information
Steering Information
Tires
Critical Stability Weights
DO NOT REPLACE ITEMS CRITICAL TO STABILITY WITH ITEMS OF DIF-
FERENT WEIGHT OR SPECIFICATION (FOR EXAMPLE: FILLED TIRES,
ENGINE). DO NOT MODIFY UNIT IN ANY WAY TO AFFECT STABILITY.
1.2
SERIAL NUMBER LOCATION
For machine identification, the serial number plate is
located at the rear of the machine on the center of the
axle. In addition, should the serial number plate be
damaged or missing, the machine serial number is
stamped on the lip of the rear axle.
Model
330LRT
430LRT
High Drive, Forward, Range
9-10 (sec/50ft)
9-10 (sec/50ft)
High Drive, Reverse, Range
9-10 (sec/50ft)
9-10 (sec/50ft)
Elevation Switch Height
6-9 ft (1.8-2.7 m)
7-10 ft (2-3 m)
Elevated Drive, F/R, Range
34 (sec/25 ft)
34 (sec/25 ft)
Gradeability Requirement
45%
45%
Model
330LRT
430LRT
Toe In / Out, (+/-) Max
0.25 in (6.35 mm)
0.25 in (6.35 mm)
Steer Angle, Inside Tire
42-44 degrees
42-44 degrees
Steer Angle, Outside Tire
32-34 degrees
32-34 degrees
Size
Ply
Rating
Foam Fill Tire
Assembly Rating
Wheel Nut
Torque
12 x 16.5
Foam Filled (Non-
Marking)
10
90 PSI @
8,000 lb. (3700 Kg) -
Static Load
170 ft lb -
DRY
(230 Nm)
33/1550 x 16.5
Foam Filled
14
90 PSI @
14,176 lb. (6430 Kg)-
Static Load
170 ft lb -
DRY
(230 Nm)
33/16LL600
Foam Filled (Sand
Tire)
10
38 PSI @
10,300 lb. (4672 Kg)-
Static Load
170 ft lb -
DRY
(230 Nm)
315/55/D20
Foam Filled
12
80 PSI @
9,650 lb. (4377 Kg) -
Static Load
170 ft lb -
DRY
(230 Nm)
Component
LRT
Wheel and Tire (each) - 12x16.5, Foam Filled
328 lb (149 kg)
Engine Only (Kubota - Diesel)
209 lb (95.1 kg)
Engine Only (Kubota - Gas/LP)
158 lb (71.4 kg)
Battery (with Generator)
171.3 lb (77.7 kg)
1
Figure 1-1. Serial Number Location
1. Serial Number Plate
2. Stamped Serial Number
Go
to
Discount-Equipment.com
to
order
your
parts
