SECTION 1 - SPECIFICATIONS
1-4
31215079
Table 1-5. Mobil SHC Hydraulic EAL 46
Table 1-6. Mobil EAL ENVIROSYN H 46
1.4
HYDRAULIC PRESSURE SETTINGS
1.5
HYDRAULIC CYLINDER SPECIFICATIONS
1.6
ENGINE SPECIFICATIONS
Table 1-7. Kubota Diesel (D1305-E4B)
ISO Viscosity Grade
46
Density@15° C
0.93
Pour Point, °C (°F), ASTM D 97
-33(-27)
Flash Point, °C (°F), Min., ASTM D 97
298(568)
Operating Temp °C(°F)
-29°(-20) to 93(200)
Viscosity
ASTM D 445 cST 40°C
43.3
ASTM D 445 cST 100°C
7.7
Viscosity Index
149
ISO Viscosity Grade
46
Density@15° C
0.874
Pour Point, °C (°F), ASTM D 97
-45°C(-49)
Flash Point, °C (°F), Min., ASTM D 97
260°C(500)
Operating Temp °C(°F)
-29°(-20) to 93(200)
Viscosity
ASTM D 445 cST 40°C
48.8
ASTM D 445 cST 100°C
7.8
Viscosity Index
145
Description
Setting
Main Relief Pressure
2700 psi (186 bar)
Steer Relief Pressure Left
2500 psi (172 bar)
Steer Relief Pressure Right
2500 psi (172 bar)
Leveling Jack Relief Pressure
2500 psi (172 bar)
Description
Bore
Stroke
Rod Dia.
Lift Cylinder
4.5 in
(114.3mm)
83 in
(2108.2 mm)
3.5 in
(88.9 mm)
Leveling Jack Cylinder
2.5 in
(63.5 mm)
27 in
(686 mm)
2 in
(51 mm)
RAM Lockout Cylinder
(Oscillating Axle)
3.62 in
(92 mm)
4 in
(101.6 mm)
3.5 in
(88.9 mm)
Steer Cylinder
2.75 in
(70 mm)
8.94 in
(227.1 mm)
1.97 in
(50 mm)
Emissions
CARB, EPA - Tier 4 Final, China Stage
III, and EU Stage V
Fuel Type:
Diesel:
- Low Sulfur (<500 ppm)
- Ultra Low Sulfur (15 ppm)
(
Required to meet Stage V
)
- up to 5% biodiesel
No. of Cylinders
3
Oil Pan Capacity
1.51 gal (5.7 L)
Engine RPM Control
Mechanical
Low RPM Set
1200
RPM
High RPM Set
2600 RPM
Alternator
60 Amp, 12V, Belt Drive
Battery
112 Amp-Hour, 950 Cold Cranking
Amps, 12 VDC
Fuel Consumption:
Low RPM
High RPM
0.41 gal/hr (1.5 L/hr)
2.0 gal/hr (7.6 L/hr)
Displacement
1.261 L (77 cu. in.)
Gross Power
24.8 Hp (18.5 Kw) @ 2600 RPM
Gross Torque
59.1 Ft. lb. (80.1 Nm) @ 1700 RPM
Go
to
Discount-Equipment.com
to
order
your
parts
