SECTION 2 - GENERAL
2-4
31215079
Footnotes
(a)
Prior to each sale, lease, or delivery.
(b)
In service for 3 months; or Out of service for 3
months or more; or Purchased used.
(c)
Annually, no later than 13 months from the date of
the prior inspection.
HYDRAULIC/ELECTRIC SYSTEM
Hydraulic Pump
1, 2, 9
1, 2, 9
Hydraulic Control Valves
1, 9
1, 9
Hydraulic Fluid***
11
11
Hydraulic Filter*
—
26
Hydraulic Hoses, Lines and Fittings
1, 9
1, 9
Hydraulic Oil Tank, Cap, and Breather
5, 7, 9
5, 7, 9
Hydraulic Cylinders (Steer and Lift)
2, 7, 9
2, 7, 9
GENERAL
Operation & Safety Manual in Storage Box
21
21
ANSI Manual of Responsibilities and AEM Safety Manual
in Storage Box (ANSI and ANSI Export Only)
21
21
Capacity Decals Installed, Secure, Legible
21
21
All Decals/Placards Installed, Secure, Legible
21
21
Annual Machine Inspection Due
—
21
No Unauthorized Modifications or Additions
21
21
All Relevant Safety Publications Incorporated
21
21, 22
General Structural Condition and Welds
2, 4
2, 4
All Fasteners, Pins, Shields, and Covers
1, 2
1, 2
Grease and Lubricate to Specifications
22
22
Function Test of All Systems
22
22
Paint and Appearance
7
7
Notify JLG of change in Machine Ownership
22
*
Replace Annually - JLG PN - 70005423.
**
Replace when system performance is degraded.
***
Every two years, drain and remove hydraulic oil reservoir, clean pick-up screen, refill with fresh hydraulic fluid.
**** Replace every six (6) months.
Table 2-2. Preventive Maintenance & Inspection Schedule (Continued)
AREA ON MACHINE
INTERVAL
PRE-DELIVERY (a)
OR FREQUENT (b)
INSPECTION
ANNUAL (c)
(YEARLY)
INSPECTION
Go
to
Discount-Equipment.com
to
order
your
parts
