SECTION 3 - CHASSIS, PLATFORM, & SCISSOR ARMS
3-40
31215079
3.8
LEVELING JACKS (IF EQUIPPED)
Cylinder Removal
REMOVAL
1. Disable machine operation.
2. Remove the three bolts (2 and 9), and flatwashers (3)
from cover (1). Carefully lift cover up and off of
machine.
3. Disconnect, cap and label all hydraulic lines and
wires connected to the leveling jack cylinder (8).
4. Support cylinder. Remove the four bolts (6) and nuts
(7) attaching cylinder to cylinder mount. Remove
jack cover attach bracket (5).
5. Carefully remove cylinder from mount.
INSTALLATION
1. Follow Removal Steps in reverse.
NOTE:
Refer to Figure 4.13, Cylinder Assemblies for cylinder
breakdown.
2. Operate leveling jacks to ensure proper operation.
1
Figure 3-32. Leveling Jack Cylinder Removal
1. Cover
2. Bolt, M6 x 20 LG
3. Flatwasher
4. Tinnerman Nut
5. Jack Cover Attach Bracket
6. Bolt, M12 x 100 LG
7. Nut/Washer
8. Leveling Jack Cylinder
9. Bolt, M10 x 220 LG
10. Nut/Washer
Go
to
Discount-Equipment.com
to
order
your
parts
