SECTION 1 - SAFETY PRECAUTIONS
1-4
– JLG Sizzor –
3120880
WITH THE MACHINE AT ALL TIMES DURING MOUNT
AND DISMOUNT.
1.5
DRIVING
• WATCH FOR OBSTRUCTIONS AROUND MACHINE
AND OVERHEAD WHEN DRIVING.
• CHECK TRAVEL PATH FOR PERSONS, HOLES,
BUMPS, DROP-OFF, OBSTRUCTIONS, DEBRIS, AND
COVERINGS WHICH MAY CONCEAL HOLES AND
OTHER HAZARDS.
• DO NOT DRIVE WITH PLATFORM RAISED OR RAISE
PLATFORM WHILE ON A SLOPING, UNEVEN, OR
SOFT SURFACE.
• BEFORE DRIVING ON FLOORS, BRIDGES, TRUCKS
AND O T HER SUR FA CE S, CHE CK ALLOWA BLE
CAPACITY OF SURFACES.
• DO NOT TRAVEL ON SOFT OR UNEVEN SURFACES,
AS TIPPING WILL OCCUR.
• WHEN DRIVING IN HIGH SPEED, SWITCH TO LOW
BEFORE STOPPING. TRAVEL GRADES IN LOW DRIVE
ONLY. THE HYDRAULIC MOTORS GENERATE MAXI-
MUM TORQUE WHEN THE JOYSTICK IS PLACED IN
THE SLOW DRIVE POSITION, MOTORS ALSO ACT AS
SERVICE BRAKES .
• DO NOT USE HIGH SPEED DRIVE IN RESTRICTED
OR CLOS E QUARTERS OR WHEN DRIVING IN
REVERSE.
• BE AWARE OF STOPPING DISTANCES WHEN TRAV-
ELING IN HIGH AND LOW SPEEDS.
• ALWAYS POST A LOOKOUT WHEN DRIVING IN
AREAS WHERE VISION IS OBSTRUCTED.
• KEEP NON-OPERATING PERSONNEL AT LEAST 2.0
M (6 FT) AWAY FROM MACHINE DURING DRIVING
OPERATIONS.
1.6
OPERATION
• READ YOUR MANUAL, UNDERSTAND WHAT YOU’VE
READ - THEN BEGIN OPERATIONS.
• DO NOT OPERATE ANY MACHINE ON WHICH DAN-
GER, WARNING, CAUTION OR INSTRUCTION PLAC-
ARDS OR DECALS ARE MISSING OR ILLEGIBLE.
• NEVER USE SCISSOR ARMS TO GAIN ACCESS TO
OR LEAVE PLATFORM.
• WHEN APPLICABLE BY REASON OF LOCAL REGULA-
TIONS OR JOBSITE/EMPLOYER SAFETY RULES, ALL
PERSONNEL IN THE PLATFORM SHALL AT ALL
T I M E S W E A R A P P R OV E D FA L L P R OT E C T I O N
DEVICES AND OTHER SAFETY GEAR AS REQUIRED.
• TO AVOID FALLING - USE EXTREME CAUTION WHEN
E N T E R I N G O R L E A V I N G P L AT F O R M A B O V E
GROUND. ENTER OR EXIT THRU GATE ONLY. PLAT-
FORM MUST BE WITHIN 0.3 METER (1 FOOT) OF
ADJACENT - SAFE AND SECURE - STRUCTURE.
• TRANSFERS BETWEEN A STRUCTURE AND THE
PLATFORM EXPOSE OPERATORS TO FALL POTEN-
TIALS. THIS PRACTICE SHOULD BE DISCOURAGED
Summary of Contents for 3369 electric
