SECTION 3 - CHASSIS & TURNTABLE
3-54
31215031
4.
Remove turntable lock pin.
5.
Apply High Strength Threadlocking Compound and pre-
torque swing drive mounting bolts to 30 ft. lbs. (40 Nm).
6.
Tighten jack bolt until pinion is completely snug against
shim and bearing then loosen jack bolt.
7.
Apply High Strength Threadlocking Compound and
torque jack bolt 50 ft. lbs. (68 Nm).
8.
Apply High Strength Threadlocking Compound and
tighten jam nut.
9.
Torque mounting bolts to 340 ft. lbs. (Nm).
10.
Remove shim and discard.
Swing Drive Lubrication
Fill Swing Drive Gearbox with 43 oz (1.27 L) 90w80gear oil with
EP additives. Oil should cover the ring gear. Torque pipe plug
to 23-25 ft.lbs (31- 33 Nm).
Jack Bolt
Jam Nut
Drain Plug
Fill Plug
Go
to
Discount-Equipment.com
to
order
your
parts
