SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121716
7-11
7.3
MAINTENANCE AND LUBRICATION
NOTE:
The following numbers correspond to those in Figure 7-2. and
Figure 7-3.
LUBRICATION INTERVALS ARE BASED ON MACHINE OPERATION UNDER NORMAL
CONDITIONS. FOR MACHINES USED IN MULTI-SHIFT OPERATIONS AND/OR EXPOSED
TO HOSTILE ENVIRONMENTS OR CONDITIONS, LUBRICATION FREQUENCIES MUST BE
INCREASED ACCORDINGLY.
1.
Swing Bearing
Lube Point(s) - 2 Grease Fittings
Capacity - A/R
Lube - MPG
Interval - Every 3 months or 150 hrs of operation
Comments - Remote Access (Optional)
Table 7-11. Lubrication Specifications
KEY
SPECIFICATIONS
MPG
Multipurpose Grease having a minimum dripping point of 350 degrees F.
Excellent water resistance and adhesive qualities; and being of extreme
pressure type (Timken OK 40 pounds minimum).
EPGL
Extreme Pressure Gear Lube (oil) meeting API Service Classification GL-5 or
Mil-Spec Mil-L-2105.
HO
Hydraulic Oil. Mobil DTE-10
OG*
Open Gear Lube - Tribol Molub-Alloy 936 Open Gear Compound. (JLG Part
No. 3020027)
BG*
Bearing Grease (JLG Part No. 3020029) Mobilith SHA 460.
LL
Synthetic Lithium Lubricant, Gredag 741 Grease. (JLG Part No. 3020022)
EO
Engine (crankcase) Oil. Refer to Engine Operation Manual.
*MPG may be substituted for these lubricants, if necessary, but service intervals will be
reduced.
To
order go
to
Discount-Equipment.com
