SECTION 4 - MACHINE OPERATION
3121303
– JLG Lift –
4-9
4.11 TIE DOWN/LIFT LUGS
Tie Down
When transporting the machine, the platform extension must
be fully retracted and the platform fully lowered in the stowed
position with the machine securely tied down to the truck or
trailer deck. Refer to the tie down lugs in Figure 4-2., Lifting
and Tie Down Location.
Lifting
If it becomes necessary to lift the machine, it is possible to
do so from the lifting lugs located at the four corners of the
machine. These lugs enable the machine to be lifted using
cranes or suitable lifting devices
NOTE:
If lifting becomes necessary from the lifting lugs, JLG
Industries Inc. recommends the use of a proper spreader
bar and straps/chains to avoid damage to the machine.
Cranes or other lifting devices must be capable of han-
dling the weights listed in the Operating Specifications
table in section 6 of this manual.
Lift Lugs
Tie Down
Tie Down
Figure 4-2. Lifting and Tie Down Location
Summary of Contents for LIFTLUX 210-25
