SECTION 1 - SAFETY PRECAUTIONS
1001070465
LIFTPOD by JLG
1-2
1.2
PRE-OPERATION
Operator Training and Knowledge
• Do not operate this machine until the operator has read
and understood the Operation, Safety, Service and Main-
tenance Manual.
• Only competent personnel can operate the machine.
• Read, understand, and obey all DANGERS, WARNINGS,
CAUTIONS, and operating instructions on the machine
and in this manual.
• Use the machine in a manner which is within the scope of
its intended application set by JLG.
• All operating personnel must be familiar with the emer-
gency controls and emergency operation of the machine
as specified in this manual.
• Read, understand, and obey all applicable employer,
local, and governmental regulations as they pertain to
operation of the machine.
Workplace Inspection
• The operator is to take safety measures to avoid all haz-
ards in the work area prior to machine operation.
• Do not operate or raise the platform while on trucks, trail-
ers, railway cars, floating vessels, scaffolds or other equip-
ment unless approved in writing by JLG.
• This machine can be operated in temperatures of 0°C to
40°C (32°F to 104°F). Consult JLG for operation outside
this range. Machine performance may vary from pub-
lished specification in very hot or cold conditions.
Machine Inspection
• Before machine operation, perform inspections and func-
tional checks. Refer to Section 2 of this manual for further
instructions.
• Do not operate this machine until it has been serviced and
maintained according to requirements specified in accor-
dance with this manual.
Figure 1-1. Read your manual
Go to Discount-Equipment.com
to order your parts
