OPERATING PROCEDURES
OPERATING PROCEDURES
It is essential to be familiar with the correct operating procedures as outlined in this
manual
The operator must have adequate training for this type of platform.
The Nano is fitted with a safety harness point as standard. If the operator chooses to
wear a safety harness, an approved ‘fall restraint’ type harness should be worn.
Operating procedures are divided into three key areas:
1.
Pre-operation checks.
What to do before operating the Nano.
2.
Normal operation.
How to use the Nano safely.
3.
Emergency operation.
How to lower the Nano without power or in the event of
operator incapacity.
There is no specific legal requirement to wear a safety harness. However,
there is an employers’ requirement to ensure the correct equipment is
used for a task and that is used correctly and safely. For this requirement
to be met, a risk assessment should be conducted to assess the potential
risks and if an increase in operator safety can be achieved with a safety harness, then
use a ‘fall restraint’ type harness only.
It is the owners and/or the users responsibility to ensure that the machine is
maintained and operated in accordance with the operation and maintenance
procedures contained within this manual.
6
