SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
31215090
3-21
3.12 PLATFORM MANUAL DESCENT
Use the Platform Manual Descent in the event of total power failure
to lower the platform using gravity. The red T-handle is located on the
left rear of the machine beside the ladder. Look for the instruction
decal located beside the T-handle.
1.
Locate the manual descent control red T-handle.
KEEP HANDS AND ARMS OUT OF THE PATH OF SCISSOR ARMS AND PLATFORM WHILE
LOWERING.
2.
Grasp the T-handle and slowly pull out to lower the scissor
arms/platform. When the platform is lowered to the desired
level, allow the T-handle to return to its closed position.
R2632
NOTE:
Ladder removed for illustrative purposes.
R3246
0"%
0"%
To
order go
to
Discount-Equipment.com
