11
Models
Revision 03-2012
Toucan 1210
Toucan 1310
WORK PLATFORM CHARACTERISTICS
2
2
2.1 Description
The Mobile Elevating Work Platform consists of a self
propelled all welded chassis, of a telescopic mast
mounted on a turntable and a telescopic jib. The
platform is mounted at the end of the jib.
The main hydraulic power unit supplying the functions
of the work platform is located at the rear of the chassis
on the right hand side. When the "Power Plus" option
is installed, an auxilliary unit is installed on the rear
of the chassis on the left hand side.
The drive function is accomplished by two hydraulic
motors propelling the rear axle.
The parking brakes integrated to the hydraulic motors
work through lack of pressure.
Steering (front axle) is accomplished by a hydraulic
cylinder.
The slewing movement is accomplished by a worm
gear motor located at the base of the superstructure.
The movements of the telescopic mast, pendular jib
and telescope are accomplished by means of
hydraulic cylinders.
The machine may be equipped (optional) with a system
controlled by a hydraulic cylinder enabling the rotation
of the platform.
The platform is kept horizontal by hydraulic cylinders
working following the "master-slave" principle.
The movements of the machine are controlled from
control panels through solenoid valves. They are
located at the front of the chassis (for structure
movements) and on the left hand side of the chassis
(for drive movements).
The progressivity of movements is obtained by an
electronic controller which controls the rotation speed
of the main hydraulic group motor. The electronic
controller is located near the emergency control panel
(ground controls), on the left hand side of the
telescopic mast.
The energy for the control and power circuits of the
mobile elevating work platform is supplied by a 24VDC
battery.
