JP New Adjustable E-Brake Using illustration:
1.
Voltage input:
7.4v - 25.2v ( 2S -6S Li-Po )
2.
Voltage output:
6V
3.
Signal input:
Connected to the brake wheel channel of receiver (on/off channel of
remote control),and set an action.
4.
Setting:
The percentage of transmitter which control the brake force.
+/-
100% is
max brake force. The percentage setting to +100%/
-100% ~ -50%
OR
(
+100% ~ +50%
/-
100%).
Max / lower
percentages of brake channel are adjust the left and right braking power
together.
5.
Capacity control:
adjustment counter clockwise ( + ) will increase the brake force,
clockwise( - ) will reduce brake force.These capacity control are adjusting the left or right
braking power alone.
6.
Size:
35mm (W) x 70mm (L) x 18mm (H)
7.
Weight:
58g
