JMC Systems Engineering AB
www.jmc.se
+46-8-82 82 70 info@jmc.se
Audio
Format
Stereo / 16-bit / 48000Hz
I/O
16
WatchDog
✓
SDK
VC++ / .NET / VB / V4L2
System Requirement
OS Support
Windows XP / Vista / Windows 7
Linux 2.6.14 or Higher
( 32-bit and 64-bit )
3
、
Packing List
Item
Amount
SC510N4 SDI Capture Card
1 (piece)
Audio cable
2 (piece)
Watchdog cable
1 (piece)
USB stick or CD with driver
1 (piece)
4
、
Hardware Installation
Before You proceed
Please note below precautions before any install/uninstall operations:
ALWAYS turn off the system before hardware installation/un-installation.
ALWAYS unplug the power cord from the wall outlet/socket before hardware
installation/un-installation.
ALWAYS touch a safely grounded object or metal object before touching the device.
DO NOT touch any devices before the system is fully off.
DO NOT touch any electrical and semiconductor components on the device, especially ICs
on board.
4.1 Card and Driver Installation
Step 1: Turn off the system and unplug power cord from wall outlet/socket.
Step 2: Remove the computer system case cover.
Step 3: Plug capture device into an available PCIe slot on motherboard.
Step 4: After hardware installation is completed, then install the driver.
